Optimum lubrication for your application

How to ensure optimum and automatic lubrication for electric motors:
Your daily challenge:
Manual lubrication of electric motors is time-consuming, error-prone, and often associated with safety risks. Unfavorable installation positions, unclear lubrication intervals, and lack of monitoring quickly lead to over- or under-lubrication. The costly consequences: bearing damage, unplanned downtime, premature component failure, and high personnel effort.
‍
The Improvement with GREASEMAX®‍

Continuous, automatic lubrication without downtime or manual re-lubrication

Relief for personnel - focus on proactive maintenance instead of time-intensive routine tasks

High operational safety by eliminating manual re-lubrication

Increased plant availability through prevention of unplanned failures

Lower spare parts costs - no premature failure of critical components

Reduced energy consumption thanks to low-friction bearings

Consistent, positive impact on the CO₂ footprint of your plant

Your benefit:
With GREASEMAX®, lubrication of your electric motors becomes predictable, safe, and low-maintenance. Instead of dealing with time-consuming routine tasks or unplanned failures, your team can refocus on value-adding activities. Continuous, automatic lubrication reliably prevents bearing damage and dry running, making your maintenance more efficient, safer, and more sustainable.

How to ensure optimum and automatic lubrication for conveyor belt systems:
Your daily challenge:
Conveyor systems are often exposed to extreme stresses during operation: dust, moisture, dirt, vibrations, and fluctuating temperatures put heavy strain on bearings and seals. Manual lubrication in this environment is particularly difficult – lubrication points are often hard to reach, and intervention during operation is dangerous. As a result, irregular manual lubrication leads to wear, downtime, and high personnel effort.

‍The Improvement with GREASEMAX®

Continuous, automatic lubrication without downtime or manual re-lubrication

Noticeable relief for your personnel thanks to fewer manual interventions

Lower spare parts costs – no premature failure of critical components

High system availability and sustainably predictable operational safety

Prevention of lubricant contamination on the system and in the environment

Positive impact on the CO₂ footprint of your conveyor system

Your benefit:
With GREASEMAX®, lubrication of your conveyors becomes predictable, safe and low-maintenance. Instead of dealing with time-consuming routine tasks or unplanned downtime due to bearing failures at deflection rollers or drive drums, your team can once again focus on value-adding activities. Continuous, automatic lubrication reliably minimizes wear and failures - regardless of whether your conveyors run continuously or intermittently. Your maintenance becomes more efficient, safer and more sustainable.

How to ensure optimum and automatic lubrication for chains:
Your daily challenge:
Chains in industrial systems are constantly exposed to stress from dust, moisture, dirt, vibrations, and fluctuating temperatures. Manual lubrication is often difficult, as chain links and sprockets are hard to access, and lubrication work frequently has to be carried out during operation – which poses a significant safety risk. Irregular or insufficient lubrication leads to premature wear, increased friction, noise, material fatigue, and ultimately costly downtime with high personnel effort.

‍The Improvement with GREASEMAX®‍

Continuous, automatic lubrication without downtime or manual re-lubrication

Optimal lubrication provides long-term protection for chain links, rollers, and guides against wear

Corrosion protection through a continuous lubrication film, even under harsh environmental conditions

Relief for your personnel by eliminating manual lubrication at hard-to-reach points

Prevention of lubricant contamination on the chain, the system, and the surroundings

Optimal lubrication reduces mechanical losses for long-term energy savings

Positive impact on the CO₂ footprint of your components

Your benefit:
With GREASEMAX®, chain lubrication becomes predictable, safe and low-maintenance. Instead of time-consuming manual re-lubrication and unplanned failures, your team can focus on value-adding activities. Continuous, automatic lubrication minimizes wear, reduces noise, and sustainably increases the lifetime of your chain components. This makes your maintenance more efficient, safer, and more sustainable.

How to ensure optimum and automatic lubrication for slideways and linear guides:
Your daily challenge:
Slide and linear guides perform precise motion tasks in many machines. At the same time, they are constantly exposed to heavy loads from dirt, moisture, coolants, dust, and vibrations. Often irregular manual lubrication results in insufficient lubricant film formation, friction, wear, running inaccuracies, or even blockages. The consequences: costly failures and high maintenance effort.

‍The Improvement with GREASEMAX®

Automatic lubrication ensures uniform, fine-dosed lubricant supply directly to the friction contact

Continuous lubrication reliably prevents micro-vibrations, running noise, and fretting corrosion

Precise functionality of the guiding systems is permanently maintained

Relief for personnel - no time-consuming re-lubrication at hard-to-reach points

Predictable maintenance intervals and increased process reliability, even in continuous or shift operation

Extended lifetime of carriages, guides and seals

Reduced energy consumption and CO₂ emissions thanks to low-friction movement and stable process performance

Your benefit:
With GREASEMAX®, lubrication of your slide and linear guides becomes precise, maintenance-free, and permanently reliable. The uniform lubricant supply protects your guiding elements against wear and corrosion. As a result, you not only increase machine availability but also ensure long-term stable production processes. Safe, efficient, and sustainable.

How to ensure optimum and automatic lubrication for fans, ventilators and filter systems:
Your daily challenge:
Fans, blowers, and filtration systems often operate under continuous load in dusty, humid, or hot environments. The bearings of these systems are exposed to high speeds, vibrations, and temperature fluctuations. Traditional manual lubrication is not only time-consuming but also frequently inaccurate and, due to unfavorable installation positions, associated with risks. The consequences: over- or under-lubrication, bearing damage, noise, vibrations, failures, and high energy consumption – with significant effects on operational safety and maintenance costs.

‍The Improvement with GREASEMAX®‍

Continuous, automatic lubrication without downtime or manual re-lubrication

Relief for maintenance personnel – scheduled maintenance instead of ad-hoc interventions

Low-noise and low-vibration operation through consistent lubricant film formation

Reduced energy consumption thanks to minimized friction and stable performance

Increased operational safety by eliminating manual re-lubrication in hazardous areas

Lower spare parts costs – no premature failure of critical components

Positive impact on the CO₂ footprint of your system

Your benefit:
With GREASEMAX®, lubrication of your fans, blowers, and filtration systems becomes reliable, low-maintenance and safe. Automatic lubricant supply provides lasting protection for your bearings – even at high speeds and under challenging environmental conditions. This increases the lifetime of your systems, reduces energy consumption, and creates an efficient, predictable, and sustainable maintenance process.

How to ensure optimum and automatic lubrication for open gears and gearing:
Your daily challenge:
Open gears and transmissions operate under extreme conditions: high pressure loads, dirt, dust, moisture, vibrations, and slow sliding movements. Manual lubrication with brushes, spatulas, or sprays is labor-intensive, imprecise, and poses safety risks. Uneven grease distribution leads to increased friction, noise, backlash, wear, and in the worst case, tooth flank damage or downtime.

‍The Improvement with GREASEMAX®‍

Uniform automatic lubrication of all tooth flanks - regardless of space or accessibility

Reduction of friction, noise, and micro-slippage through consistent lubricant film formation

No over- or under-lubrication

Protection against contaminants - grease application seals against dust and moisture

No risk for maintenance personnel - lubrication is contact-free during operation

Higher system availability and extended lifetime of gears

Reduced grease consumption, clean surroundings, lower environmental impact

Your benefit:
With GREASEMAX®, lubrication of your open gears and transmissions becomes predictable, safe and process-stable. Instead of risky manual interventions, GREASEMAX® ensures precise lubricant distribution on the tooth flanks. This extends the lifetime of your components, increases operational safety, and permanently reduces maintenance effort, grease consumption, and repair costs.

How to ensure optimum and automatic lubrication for pumps:
Your daily challenge:
Pumps often operate around the clock and must reliably perform under high loads, vibrations, temperature fluctuations, and exposure to media. Manual lubrication of pump bearings is particularly error-prone: hard-to-reach lubrication points, inaccurate grease quantities, or irregular intervals quickly lead to over- or under-lubrication. The consequences: bearing and shaft damage, unplanned downtime, high maintenance effort, and safety risks during re-lubrication.

‍The Improvement with GREASEMAX®‍

Optimal automatic lubrication without plant downtime or manual re-lubrication

Noticeable relief for your personnel thanks to fewer manual interventions

Lower spare parts costs - no premature failure of critical components

High system availability and sustainably predictable operational safety

Prevention of lubricant contamination on the system and in the surroundings

Positive impact on the CO₂ footprint of your pump system

Your benefit:
With GREASEMAX®, lubrication of your pumps becomes reliable, low-maintenance and safe. Continuous lubricant supply prevents bearing failures and reliably protects your pumps, even during continuous operation and under demanding conditions. This increases operational safety, reduces maintenance costs, and creates clear, predictable processes for your maintenance team.

How to ensure optimum and automatic lubrication for spindles:
Your daily challenge:
Spindles in machines perform highly precise movements under high mechanical loads, fast change cycles, and tight tolerances. Insufficient or incorrect lubrication quickly leads to increased wear, friction, loss of accuracy, and ultimately downtime. Manual lubrication is often irregular, inaccurately dosed, and associated with high time and safety effort.

‍The Improvement with GREASEMAX®

Continuous, precise lubricant supply to critical spindle points - even during operation

Protection against friction, wear, and thermal stress - for longer component life

Improved process accuracy through uniform sliding conditions

No manual re-lubrication required - increased safety and reduced effort for personnel

Environmentally friendly: lower lubricant consumption through demand-oriented dosing

Less cleaning effort thanks to clean lubrication points and no excess grease

Your benefit:
With GREASEMAX®, lubrication of your spindles becomes predictable, safe and process-stable. Instead of risky manual interventions, GREASEMAX® ensures precise lubricant distribution. This extends the life of your components, increases operational safety, and permanently reduces maintenance effort, grease consumption, and repair costs.

How to ensure optimum and automatic lubrication for roller, plain and ball bearings:
Your daily challenge:
Rolling, sliding, and ball bearings are key components in nearly all machines and systems. Their reliable function is essential for the entire production process. Manual lubrication of these bearings requires precise dosing, clean conditions, and regular intervals. In practice, however, lack of time, hard-to-reach bearing points, environmental stresses such as dust, moisture, or heat, and over- or under-lubrication often lead to increased wear, failures, and high maintenance effort.

‍The Improvement with GREASEMAX®

Automatic, consistent lubrication of all bearings - precisely dosed and demand-oriented

Protection against insufficient lubrication, friction, heat generation, and premature bearing failure

No manual re-lubrication required

Extended lifetime of your bearings and downstream components

Prevention of lubricant overdosage, environmental contamination, or machine soiling

Relief for maintenance personnel by eliminating recurring routine tasks

Positive impact on the CO₂ footprint of your system

Your benefit:
With GREASEMAX®, lubrication of your rolling, sliding, and ball bearings becomes predictable, safe, and process-stable. Optimal lubrication without manual effort and without production interruptions. This increases operational safety, reduces maintenance costs, and creates clear, predictable processes for your maintenance team.

How to ensure optimum and automatic lubrication for ropes:
Your daily challenge:
Cables in applications such as cable cars, crane systems, elevators, or conveyor systems are continuously exposed to environmental influences. UV radiation, moisture, dust, dirt, and friction put heavy strain on the material and bearing fixtures. Manual lubrication is difficult: hard-to-reach cable guides, often hazardous installation heights, and unclear lubrication intervals lead to dry running, corrosion, wire breakage, or uncontrolled wear. The consequences: reduced performance, cable breakage, long downtime, and high maintenance costs.

‍The Improvement with GREASEMAX®‍

Automatic re-lubrication directly on the cable - even during operation

Uniform lubricant film prevents friction and wire damage with minimal grease application

Corrosion protection through a continuous protective film, even under harsh environmental conditions

No manual lubrication at dangerous heights - maximum safety for personnel

Clean operation: no excess grease, no contamination of pulleys or machinery

Sustainable: lower lubricant consumption, less waste, and reduced CO₂ footprint

Your benefit:
With GREASEMAX®, lubrication of your cables becomes automated, precise and safe. Your cable systems remain continuously protected without requiring personnel to perform hazardous tasks or stopping the system.