.webp)
.svg.webp)
Your daily challenge
Time is scarce and manual lubrication consumes valuable resources:
- Regular lubrication intervals tie up staff
- Troubleshooting lubrication issues drives up costs
- Time pressure caused by short-term maintenance measures
The change with GREASEMAX®
Your benefit:
Significant time savings in daily maintenance, freed-up capacity for value-adding tasks, a predictable work routine and no lubrication-related emergency interventions.
Your daily challenge
Manual lubrication poses risks:
- Re-lubrication during ongoing operation involves danger
- Higher risk due to frequent access to hard-to-reach areas
- Hazards from dripping oil or grease on walkways
- Unsafe conditions caused by heat, moving parts, and limited accessibility
The change with GREASEMAX®
Your benefit:
Maximum workplace safety for your team, prevention of accidents and near-misses through risk-free lubrication. Standardized, safe processes instead of manual lubrication under time pressure.
Your daily challenge
Inaccurate manual lubrication causes:
- Friction, overheating, and excessive wear
- High personnel effort due to short lubrication intervals
- Unplanned downtime caused by premature wear
- Grease contamination in the surroundings due to overdosing
The change with GREASEMAX®
Your Benefit:
Low-wear operation, reduced maintenance and repair costs, less personnel effort, sustainable use of resources and a long-term clean machine environment.
Your daily challenge
Manual lubrication is time- and labor-intensive, often involving high effort:
- Regular inspection rounds
- Personnel tied up with routine tasks
- Risk of consequential errors (over- or under-lubrication)
The change with GREASEMAX®
Your benefit:
Reliable, low-wear operation, significantly reduced maintenance and repair costs, less personnel required for routine tasks, and resource conservation through precise lubricant dosing.
Your daily challenge
Lubrication-related production stoppages hit companies unexpectedly:
- Manual lubrication errors
- Missed or forgotten lubrication points
- Oversights caused by time pressure
- Carelessness due to lack of time
- Component damage from under- or over-lubrication
The change with GREASEMAX®
Your benefit:
No lubrication-related production downtime, high operational reliability through continuous supply and scheduled maintenance instead of unplanned emergency interventions.
Your daily Challenge
Efficiency loss creeps in gradually, often caused by seemingly minor issues:
- Dry running and increased friction
- Reduced lifetime of bearings and seals due to insufficient lubrication
- Manual lubrication often not possible during operation
- Time-consuming routines instead of strategic maintenance
The change with GREASEMAX®
Your benefit:
Consistently high machine performance without efficiency loss, reduced spare parts costs, lower energy consumption for maximum resource conservation, and sustainable, strategic maintenance instead of reactive measures.
Areas of application, lubrication points and operating conditions vary a lot in practice.
We recommend first determining the lubricant requirement of the lubrication point.
The machine's maintenance instructions are generally used for this purpose.
The following factors must be taken into account:
Degree of utilization of the machine, condition of the lubrication point and its sealing, weather influences, dust, dirt, etc.
The following guide values support your selection:
* Reference temperature 25 °C
For shaft diameters over 160 mm, we recommend connecting two lubricators with a T- or Y-piece. This doubles the dispensing quantity.
